盈丰|国际娱

                        |
                        United States

                        Minwax®
                        Design Series Grain Highlighting Wax

                        Overview

                        Minwax Grain Highlighting Finishing Wax protects bare and stained wood with a hand-rubbed finish that whitens and accentuates wood grain. Ideal for small projects, furniture, cabinets and more.

                        • Draws out detail and character of wood grain.
                        • Apply to bare or already stained wood.
                        • Easy one coat application, cures in approximately one hour.
                        • Oil based formula cleans up with mineral spirits.
                        • NOT RECOMMENDED FOR LARGE SURFACES, SUCH AS FLOORS.

                        Product Details

                        Sheens: Matte
                        Application Tool: Rag
                        Location: interior wood surfaces
                        Recoat: no recoat needed
                        Dry Time: 1 hour
                        Cleanup: Mineral Spirits or VOC compliant cleaner
                        Coverage: 60-75 sq ft per 8 oz.
                        Coats: 1 coat
                        Recommended Uses: Ideal for furniture, cabinents, trim and more

                        Directions

                        Instructions for using Minwax® Design Series Grain Highlighting Wax.

                        Preparation

                        • Grain Highlighting wax can be applied to bare/stripped wood or already stained wood.
                        • When starting with bare wood, make sure it’s clean and dry. For best results, start with a medium-grit sandpaper and increase the grit as you go, finishing with #220 as final sand. Remove sanding dust.
                        • When starting with stained wood, make sure it’s clean and dry, and does not have a protective topcoat finish.

                        Application

                        • Test before applying on a hidden spot to make sure you like the look.
                        • Stir wax thoroughly before and occasionally during use.
                        • With a clean rag, apply wax evenly and in a circular motion.
                        • Allow wax to sit on wood for 3-5 minutes.
                        • With a clean, lint-free rag, wipe excess wax off by wiping against the grain.
                        • Reapply wax as needed.

                        Cleanup: Mineral spirits or VOC compliant cleaner. Follow manufacturer’s safety instructions.

                        CONTAINS PETROLEUM NAPHTHA. Contents are COMBUSTIBLE. Keep away from heat and open flame.

                        VAPOR HARMFUL. Use only with adequate ventilation. To avoid over exposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage.

                        FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.

                        DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.

                        DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.

                        Frequently Asked Questions

                        WHAT IS A GRAIN HIGHLIGHITING WAX?

                        It protects bare and stained wood with a hand rubbed finish that whitens and accentuates the wood grain.

                        HOW DO I APPLY MINWAX GRAIN HIGHLIGHTING FINISHING WAX?

                        Before use, stir the wax thoroughly. Apply a thin even coat of Minwax Grain Highlighting Finishing Wax with a lint free rag to project in a circular motion covering the entire surface. Allow wax to dry 5-10 minutes. With a clean, lint free rag, buff excess wax off. Allow to cure for approximately 1 hour before light handling.

                        CAN I APPLY GRAIN HIGHLIGHTING FINISHING WAX OVER OIL BASED STAIN AND WATER BASED STAIN?

                        Yes. Minwax Grain Highlighting Finishing Wax can be applied over oil based stain such as Minwax® Wood Finish™ stain or water based stain such as Minwax® water-based stain.

                        Safety Sheets

                         

                                              Finance

                                              culture

                                              Foreign exchange

                                              Go abroad

                                              Finance

                                              Information

                                              image

                                              Technology

                                              aviation